NAHLPz≤òÖö%f░∞≡Ω╨│` ▐"╜%Q'U'|)+ï,Å,≥/`2╓4╡7╥8∞9]<Ñ=⌐=¡=F@∩B
D(E¢GΣHΦH∞H≡H⌠H╓KNóO9QASçV└XSZΩ[ε[≥[÷[·[■[\\
\\\\\<^adc¬e g╦iπkn-pârFudwFyJyNy{Q}ƒúº°ücäâå▄çφë≤ï┼ìçÅïÅÅÅVÆ*ò½û»û│û╖û╗û┐û├û╟û⌠ÿvÜ£ó¥ÆƒûƒÜƒ₧ƒóƒªƒ⌐í/ú╒ñdªW¿[¿_¿c¿g¿j½|
	
(-                     ViruShell Help Index                          General key usage ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀                            DeskTop      ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀                             SCAN        ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀                            CLEAN        ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀                             Misc        ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀                        About ViruShell  ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀                        How to register  ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀     ≤   ┌ General Key usage ─────────────────────────────────┐    │ F1          -  Access the on-line help.            │    │ Cursor keys -  Move cursor to select.              │    │ PgUp,PgDn   -  Move up/down while in scrollwindow  │    │ Enter       -  Accept entered data or selections.  │    │ Esc         -  Abandon entered data or selections. │    │ Space       -  Toggles topics in listing.          │    └────────────────────────────────────────────────────┘     ┌ Key usage in the Help window ──────────────────────┐    │ F1          -  Goto help index                     │    │ F2          -  Back to last topic read             │    │                (Backs up to 10 levels)             │    │ Cursor keys -  Move highlighted topic              │    │ Enter       -  Goto highlighted topic              │    │ Esc         -  Quit Help.                          │    └────────────────────────────────────────────────────┘                       Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ 
ë                      How to Register                       ═══════════════   This program is distributed as ShareWare, meaning that  you can test this program for a period of 30 days without  any obligations.   If you like this program and want to use it after the  trial period you have to register. Registration is  handled by Virus Help Centre HB, Sandviken, Sweden.   Use the registration form distributed with this program,  the file is named VIRUSHEL.REG and contains further  instructions on registration.        Thanks for supporting the ShareWare concept!                        Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀  4                    SCAN - The program                     ══════════════════     SCAN (also known as VIRUSCAN) is a virus detection and    identification program for the IBM PC and compatibles,    manufactured by McAfee Associates, U.S.A.     SCAN searches your computer for known viruses in memory,    boot sector, partition table and selected files on your    diskettes and hard disks. SCAN detects known viruses by    comparing your files to specific signatures strings    stored in the SCAN executable file.     SCAN can optionally protect your system against new,    unknown viruses by appending validation codes to .COM    and .EXE files and later check these values against any    changes, warning you of any changes taken place.                       Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ s=                   'CLEAN' - The program                    ═════════════════════    CLEAN (also known as CLEAN-UP) is a virus disinfection   program for the IBM PC and compatibles, manufactured by   McAfee Associates, U.S.A.    CLEAN searches through the boot sector, partition table,   or files of your computer and removes a specified virus.    Normally CLEAN is able to repair the infected area of   your computer and restore it to the preinfected status.   However, some specific viruses is working by physically   overwriting the file infected, thus making it impossible   to restore the file. In this case SCAN asks you if it is   OK to overwrite and delete the file. You are advised to   do this to stop further infections from the virus.                       Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀  4                     McAfee Associates                      ═════════════════    SCAN and CLEAN are manufactured by McAfee Associates and   is distributed as ShareWare software. As such you are   required to register the program after the initial trial   period. Contact either McAfee Associates or one of their   authorized agents to register.    McAfee Associates           (408) 988-3832 office   4423 Cheeney Street         (408) 970-9727 fax   Santa Clara, CA  95054      (408) 988-4004 BBS 2400 bps   U.S.A                       (408) 988-5138 BBS HST 9600                               (408) 988-5190 BBS v32 9600                               CompuServe    GO VIRUSFORUM                               InterNet  mcafee@netcom.com                        Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀ ≥                    NewAge Productions                     ══════════════════    All suggestions and bugreports for ViruShell should be    sent to Jonny Bergdahl, NewAge Productions.    I can be reached on any of the following addresses:                  Phone    : +46-36-121345                 Fax      : +46-26-275720 (VHC)                 BBS      : +46-36-121323 (8n1, TTY/ANSI)                 Mail     : NewAge Productions                            Lillgatan 34 B                            S-554 51 Jönköping                            Sweden                 InterNet : vhcna@abacus.hgs.se                 FidoNet  : 2:204/503                 VirNet   : 9:463/101                       Go to Help index ▄                     ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀  ▐                     Virus Help Centre                      ═════════════════  Registration of ViruShell is handled by Virus Help Centre.   VHC can be reached on any of the following addresses:                  Phone    : +46-26-100518                 Fax      : +46-26-275720                 BBS      : +46-26-275710 (8n1, TTY/ANSI)                 Mail     : Virus Help Centre                            Box 7018                            S-811 07 Sandviken                            Sweden                 InterNet : vhc@abacus.hgs.se                 FidoNet  : 2:205/204                 VirNet   : 9:461/101                 Videotex : 26262626-1                       Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀  ╟	

                          Desktop                           ═══════   The Desktop menu option lets you save and load different   setup files, display program information, shell to a   secondary Command shell and to quit the program.                       ┌──────────────────┐                      │ Save Setup       │                      │ Load Setup       │                      │──────────────────│                      │ Shell to DOS     │                      │──────────────────│                      │ Quit ViruShell   │                      └──────────────────┘            Select menu option to display detailed help.                         Go to Help index ▄                       ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀  ¢-	
                         Save Setup                          ══════════   This option lets you save different setups under different  names, for later loading. The setup saved includes all  settings of the program including On/Off flags, paths and  drive selections.   Use this to create some useful setups to use on different  occasions, for instance you can setup a complete scan for  use once a week, and a setup for scanning only memory and  the DOS directory for a fast scan every day.   Different setup files can be loaded by the Load Setup  command found in the DeskTop menu.                         Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀  l	%
                         Load Setup                          ══════════     This option lets you load different setups previously    saved with the Save setup in the DeskTop menu.    The saved setup includes all settings of the program    including On/Off flags, paths and drive selections.     You can use this to create some useful setups to use    on different occasions, for instance you can setup a    complete scan for use once a week, and a setup for    scanning only memory and the DOS directory for a fast    scan every day.                           Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ n╫                        Shell to DOS                         ════════════  This option lets you temporarily shell out to DOS without  actually leaving the program. To return to the program,  just type EXIT at the DOS-prompt.   Note that available memory is somewhat limited because  the program is still in memory, thus it might be problems  to execute some memory hungry programs while shelled out.   Note: Do not load any TSR-programs while shelled to DOS,        this makes it impossible to return to the program        without rebooting the computer.   The prompt reminds you of the fact that you are running  in a secondary command shell.                        Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀î                      Quit ViruShell                       ══════════════     Use this option when you want to quit ViruShell.     Your current setup will automatically be saved, so the    next time you run ViruShell, the different options will    be retained.                     Thanks for using ViruShell.                            Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ o 


	                      Enter File Name                       ═══════════════    Enter a valid filename (leaving out the extension) for   the setup file. A valid filename should be between 1 and   8 valid characters.    Press Enter when you are through entering the file name.   The file will be saved, and you will be returned to the   DeskTop menu.    To load the setups saved with this option, select the   Load Setup option in the DeskTop menu.                           Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ eÇ0
		                         Load Setup                          ══════════    Select a setup file in this window by using the up and   down cursor keys and press Enter to load the selected   file.    The setup files is previously saved from the Desktop   menu, by selecting the Save Setup option.                               Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ hp-                      About ViruShell                       ═══════════════       This window shows you some information about this      program.       To exit the window, just press Enter.                             More about ViruShell ▄                    ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀                      Go to Help index   ▄                    ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀ 8

Φâ                         Scan Menu                          ═════════    The Scan menu options lets you setup all options for    Scan and NetScan, as well as to start the scanning.                      ┌──────────────────────┐                     │ Scan                 │                     │ NetScan              │                     │──────────────────────│                     │ AV functions       > │                     │──────────────────────│                     │ Set Options        > │                     │ pUtput options     > │                     │ Overlay extensions > │                     │ Scan path/drives   > │                     └──────────────────────┘           Select menu option to display detailed help.                                 Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀H%+
	E                            Scan                             ════    Select this option to execute the SCAN program with the   flags and other options selected in the Set options,   Overlay extensions and Scan Path/Drives options of   the Scan menu.    Set the Autorun Clean option to ON prior to selecting   this option to automatically run Clean to disinfect any   infected files found.    Scan is run in a window showing the progress of the   program. Press Ctrl-C to stop the execution of Scan.                          Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ >K%.

	E#
                          NetScan                           ═══════   Select this option the execute the NETSCAN program with  the flags and other options selected in the Set options,  Overlay extensions and Scan Path/Drives options of  the Scan menu.   Set the Autorun Clean option to ON prior to selecting  this option to automatically run CLEAN to disinfect any  infected files found.   NETSCAN is run in a window showing the progress of the  program. Press Ctrl-C to stop the execution of NETSCAN.                          Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀  ├?'[#\                        AV Functions                         ════════════   In order to maximize protection against new, unknown virus  it is possible to insert checksums in executable files.  These checksums can later be checked by setting the  Check validation codes option in the Scan menu to ON.   To insert the checksums in your programs, just setup the  path as if you should scan the disk, and then select the  Add AV to files under this option. Note that all files  will have their size increased by 10 bytes to hold the  checksums.   To remove the checksums, use the Remove AV from files  option under this option.                        Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ t*                        Set Options                         ═══════════    Select this option to reveal a menu that lets you setup   all flags that change the behaviour of SCAN.                                   Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ t
%                      Output Options                       ══════════════    Select this option to reveal a menu that lets you setup   behaviour regarding the output of SCAN.                                   Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀_@
                Set Scan overlay extensions                 ═══════════════════════════     By default SCAN will only scan executable programs when    run. However, certain programs uses overlay files to    store additional program code in. To scan those files    for viruses, set the flag Scan overlay files to On in    the Set options menu.     The overlays scanned is determined by this option, here    you can enter up to three overlay extensions. Normally    these are called .OVL, .OVR or similar extension names.                            Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ n@                      Scan Path/Drives                       ════════════════      This option leads you to a menu that lets you select     whether you wish to scan only one specific path or     scan one or more disks in full.                                  Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀    x
 !"                        Clean Menu                         ══════════     The Clean menu options lets you setup all options for    CLEAN as well as running CLEAN.                      ┌──────────────────────┐                     │ Run Clean            │                     │──────────────────────│                     │ Set Options        > │                     │ Overlay extensions > │                     │ Scan path/drives   > │                     └──────────────────────┘            Select menu option to display detailed help.                                    Go to Help index ▄                        ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀  	y&+
 !".	E╧                            Clean                            ═════    Select this option the execute the CLEAN program with the   flags and other options selected in the Set options,   Overlay extensions and Clean Path/Drives options of   the Clean menu.    Note that Clean is automatically run after SCAN if any   infected files is found and if you have also set the   Autorun Clean option in the Scan menu to ON prior   to running Scan.    Clean is run in a window showing the progress of the   program. Press Ctrl-C to stop the execution of Scan.                         Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀  *                        Set Options                         ═══════════    Select this option to reveal a menu that lets you setup   all flags that change the behaviour of CLEAN.                                   Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀  %                      Output Options                       ══════════════    Select this option to reveal a menu that lets you setup   behaviour regarding the output of CLEAN.                                   Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀\R
                    Set overlay extensions                    ══════════════════════     By default CLEAN will only clean executable files when    run. However, certain programs uses overlay files to    store additional program code in. To clean those files    for viruses, set the flag Clean overlay files to On in    the Set options menu.     The overlays scanned is determined by this option, here    you can enter up to three overlay extensions. Normally    these are called .OVL, .OVR or similar extension names.                            Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀  A                     Clean Path/Drives                      ═════════════════      This option leads you to a menu that lets you select     whether you wish to clean only one specific path or     clean one or more disks in full.                                 Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ e    ┴)	*
+,-                        Misc Menu                         ═════════    The Misc menu options lets you access assorted functions   from the ViruShel program.                      ┌──────────────────────┐                     │ Display Virus info   │                     │ Last Scan results    │                     │ Last Clean results   │                     │──────────────────────│                     │ Run VSumX            │                     │──────────────────────│                     │ About ViruShell      │                     └──────────────────────┘            Select menu option to display detailed help.                         Go to Help index ▄                        ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀"!*3                     Display virus info                      ══════════════════    This option lets you read the VIRLIST.TXT textfile that   is being distributed with the McAfee line of programs.    This file lists most of the virus that SCAN and CLEAN are   able to detect, as well as generic information of how   they infect computers.    Use the arrow cursor keys to scroll the text up and down   in the display window, press ESC to stop viewing the file.                            Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ─å                     Last Scan results                      ═════════════════    Every time you execute SCAN from ViruShell, the result   is stored in a file on disk. This options let you view   that file after the scan.    Every time you run SCAN, this file is overwritten with   fresh information.                               Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ aè                     Last Clean Results                      ══════════════════    Every time you execute CLEAN from ViruShell, the result   is stored in a file on disk. This options let you view   that file after the scan.    Every time you run CLEAN, this file is overwritten with   fresh information.                               Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ d                         Run VSumX                          ═════════       This option lets you start the hypertext format      "Virus Information Summary List" manufactured by      Patricia Hoffman and distributed as Shareware.      This program contains lots of useful information on     almost all known viruses, and is highly recommended     for anyone that wishes to obtain more knowledge on     virus related topics.                             Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀  4
	                      About ViruShell                       ═══════════════     ViruShell is a program used to simplify the usage of    the McAfee products Scan, NetScan and Clean, as well    as function as a general frontend for other virus-    related programs.    ╒══════════════════════════════════════════════════════╕   │                ViruShell is (C) 1991,                │   │Jonny Bergdahl, NewAge Productions, Jönköping, Sweden,│   │                         and                          │   │        Virus Help Centre, Sandviken, Sweden          │   │                                                      │   │                  All rights reserved                 │   ╘══════════════════════════════════════════════════════╛                        Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀"!*3                     Display virus info                      ══════════════════    This option lets you read the VIRLIST.TXT textfile that   is being distributed with the McAfee line of programs.    This file lists most of the virus that SCAN and CLEAN are   able to detect, as well as generic information of how   they infect computers.    Use the arrow cursor keys to scroll the text up and down   in the display window, press ESC to stop viewing the file.                            Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ då                     Last Scan results                      ═════════════════    Every time you execute SCAN from ViruShell, the result   is stored in a file on disk. This options let you view   that file after the scan.    Every time you run SCAN, this file is overwritten with   fresh information.                               Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ aè                     Last Clean Results                      ══════════════════    Every time you execute CLEAN from ViruShell, the result   is stored in a file on disk. This options let you view   that file after the scan.    Every time you run CLEAN, this file is overwritten with   fresh information.                               Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ d                               Scan - Scan all files                    ═════════════════════    If you set this option to ON, Scan will check all files   including data files on the referenced drive for viruses.           Use this option when:           ■ A file-infecting virus has been detected            on your system.           ■ Checking new disks prior to installing            the programs contained.    Use of this switch will increase the scanning time.                         Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀╝                  Scan - Memory scan type                   ═══════════════════════   Select if and how memory should be scanned by Scan.          Selections :         ■ None   : Skip memory check. Should only be                    used in 100% virus free environments.         ■ Normal : The normal DOS-memory is scanned                    for viruses.         ■ Himem  : DOS, UMB and HMA is scanned                    for viruses.        Memory types:       Normal DOS memory   (DOS) : (0-640 Kilobytes)       Upper Memory Blocks (UMB) : (640-1024 kilobytes)       High Memory Area    (HMA) : (1024-1088 kilobytes)                        Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ═\               Scan - Check validation codes                ═════════════════════════════     If you set this option to ON, Scan will check the    files for previously inserted validation codes.     If the validation codes don't match, Scan will report    that the files has been modified and that a viral    infection might have occurred.     Certain programs writes their setup to the executable    program file, thus making Scan report a false virus    infection.     Using this option adds 25% to the scanning time.                         Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ 8>                    Scan - Scan overlays                     ════════════════════     When Scan is scanning program files for viruses, it    looks for the normal program extensions, .EXE, .COM    end .SYS. Some programs also store executable code in    overlay files. If you set this option to ON, Scan will    search files with other extensions.     To add the names of the extension change them in the    submenu Scan - Overlay names. Up to three different    extensions can be added.                            Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀  M                Scan - Delete infected files                 ════════════════════════════       This option tells Scan to prompt the user to      overwrite and delete infected files when found.       After deleting the file cannot be recovered.       This option should only be used if Clean is not      available, since Clean usually is able to safely      remove the virus and recover the infected file.       Boot sector and partition table infectors cannot      be removed by this option, use Clean.                          Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀─             Scan - Scan memory for all viruses              ══════════════════════════════════     This option tells Scan to search memory for all known    viruses that can be memory resident.     In normal use, Scan only checks memory for certain    viruses that otherwise would infect all files during    the scan, or otherwise causes damage during the Scan.                               Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ r               Scan - Scan inside LZEXE files                ══════════════════════════════     This option tells Scan to look inside files compressed    with the LZEXE file compression program.     If this option is off, Scan will still check these    files for external infections.     The only way a virus can be contained inside a LZEXE    is if the program file was infected prior to packing    with the LZEXE file compression program.                            Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀                  Scan - Scan inside PKLite files                ═══════════════════════════════     This option tells Scan to look inside files compressed    with the PKLite file compression program.     If this option is off, Scan will still check these    files for external infections.     The only way a virus can be contained inside a PKLite    compressed file is if the program file was infected    prior to packing with the PKLite compression program.                            Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ e                    Scan subdirectories                     ═══════════════════     This options allows Scan to scan subdirectories under    the specified path.     Example:    Drive C: contains the following directory structure:     C:\──┬──DOS         ├──PGM          If the path to scan is set to         │   ├──TEXT     C:\PGM, all executables in         │   └──CALC     C:\PGM\, C:\PGM\TEXT\, and         └──DATA         C:\PGM\CALC\ will scanned.                          Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀N                    Scan - Autorun Clean                     ════════════════════     This option determines whether Clean automatically    should be run after Scan when a virus has been found.     By setting this option to ON you are saved from    manually setting the options of Clean to clean the    infected files as found by Scan.     If you set this option to OFF, you run the risk of    miss an option, effectively making the cleaning of the    system incomplete, and leaving some files infected.                           Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀╗                   Use external scanfile                    ═════════════════════   This option is used to search for viruses from an external  textfile containing user-defined search strings. This file  should be called VIRUSHEL.DAT and be placed in the current  directory.   This option is intended for use as an emergency exit, this  file can for example be distributed by your dealer to take  care of a fast spreading virus until a new version of SCAN  has been released.   Note: If you create this file yourself, it is recommended  that it is not used together with the 'Delete infected  files' option of Scan.                        Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀                     Scan DOS 4 boot sector                    ══════════════════════    This option should be used to scan hard disks partitioned   under DOS 4.0 or above that has been damaged by a boot   sector or partition table infecting virus.    Hard disks infected this way gives the 'invalid media'   error message when accessed, this means that you should   only use this option if you get this message when you   try to access the drive.                             Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ e┌                  Scan multiple floppies                   ══════════════════════      This option lets you scan multiple diskettes without     restarting Scan for every diskette.      To utilize this option, set it to ON, and then select     'Scan one path only' to OFF, and select the diskdrive     under 'Drives to scan'. Make sure that only one drive     is selected in this list.                              Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀    ┼                      McAfee Language                       ═══════════════      This option lets select in what language SCAN and     NETSCAN will output it's text.      You toggle the options by pressing Enter on this     topic, the topic changes to reflect which language     that is currently active.      Currently McAfee supports English, French and Spanish.                             Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀  .                   Skip filename display                    ═════════════════════      Normally when SCAN or NETSCAN is scanning your disk(s)     for virus infections, it shows the name of the file     that is currently scanned. This may prolong the actual     scanning process to much if there are many files to     scan.      Turn this option ON to show the files as they are     scanned, and turn it OFF to stop the files from being     displayed as they are scanned.                            Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ tF                   Beep when virus found                    ═════════════════════      With this option you can select if SCAN and NETSCAN     should make a beep for every virus found while the     actual scanning is in progress. ViruShell always gives     a warning sound after the scanning is finished in case     a virus was found.      Turn this option OFF if you know that a lot of files     on your system is infected and want to speed up the     scanning, leave it ON in all other cases.                            Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ e  I                  Clean - Clean all files                   ═══════════════════════      By turning this switch ON, Clean is forced to clean     all files, including data and overlay files, in the     selected path.      Use this if an overlay-infecting virus is found by     Scan.      This option should be used as a safety instead of     using the 'Scan overlays' option, since overlays     might have an extension that don't match on of the     three extension that can be used with that option.                          Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ nT2!Q                   Clean - Clean overlays                    ══════════════════════      By turning this option on, Clean will try to clean     overlay files as well as the normal program files.     This option uses the extensions added in the Clean -     Overlay extensions menu option.      To add or remove an extension, use the 'Clean' -     'Overlay extensions' menu option. Up to three     extensions can be used.      To Clean more than three extension types, use the     Clean all files option instead.                          Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ l             Clean - Clean DOS 4.0 boot sectors              ══════════════════════════════════     Use this option for hard disks partitioned with DOS 4.0    or above, that has been damaged by a boot sector or    partition table infecting virus.     Use this option when the message 'Invalid media' is    being displayed when trying to access the disk.     This option will only clean the partition and boot    sector, not the files on that drive.                            Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀  Q              Clean - Clean Multiple diskettes               ════════════════════════════════      Use this option if you want to clean multiple floppy     disks from the same virus. This option saves you from     running Clean multiple times.                                  Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀   	()                      Clean - Virus ID                       ════════════════      This option lets you select the virus identification     code (as provided by Scan) that is used by Clean to     identify the virus to remove.      Select the ID from a list of ID's as read from the     Virlist.Txt textfile.      For a comprehensive description of these viruses, check     the Misc - Display Virlist.Txt option in the menu.                            Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀  ∙                     Enter virus name                      ════════════════     This option lets you enter the tag name of the virus    you wish to remove from your system. The tag name is    reported by SCAN when a virus is found.     The tag name should be entered without the brackets    ('[' and ']') as reported.     Optionally, if installed, you can select the tag from    a list of tags by pressing the F3 key.                            Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀┼                     Select Virus name                      ═════════════════      This option lets you select the tag name of the virus     you wish to remove from your system. The tag name is     reported by SCAN when a virus is found.      Move the highlighted topic in the list by using the     cursor keys. Press Enter to select the highlighted     virus tag.                             Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ e║                      McAfee Language                       ═══════════════      This option lets select in what language Clean will     output it's text.      You toggle the options by pressing Enter on this     topic, the topic changes to reflect which language     that is currently active.      Currently McAfee supports English, French and Spanish.                             Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀  ░?'#\                      Add AV to files                       ═══════════════   In order to maximize protection against new, unknown virus  it is possible to insert checksums in executable files.  These checksums can later be checked by setting the  Check validation codes option in the Scan menu to ON.   To insert the checksums in your programs, just setup the  path as if you should scan the disk, and then select this  option. Note that all files processed will have their size  increased by 10 bytes to hold the checksums.   To remove the checksums, use the Remove AV from files  option in this menu.                         Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀╜?' [                     Remove AV to files                      ══════════════════   In order to maximize protection against new, unknown virus  it is possible to insert checksums in executable files.  These checksums can later be checked by setting the  Check validation codes option in the Scan menu to ON.   To remove the checksums from your programs, just setup the  path as if you should scan the disk, and then select this  option. Note that all files processed will have their size  decreased by 10 bytes after the removal of the checksums.   To add the checksums, use the Add AV from files option  in this menu.                         Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ═o*(                  Search files without AV                   ═══════════════════════   This option lets you scan your system for files that has  not been protected by the AV checksum. Run this option and  view the result in the View last Scan result option of  the Misc menu.                                 Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀         f	
g                     Scan one path only                      ══════════════════      This option lets you select if you want to scan only     one specific path or scan one or more disks in full.      By setting this option to On, you will be able to     enter a path in the Path to scan option in this     menu, and by setting it to Off, you will be able to     select the drives to scan from a list of drives from     the Drives to scan menu option.                             Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ kpD	
                        Path To Scan                        ════════════      This option lets you enter a specific path to scan.      If you have set the Scan subdirectories option in     the Set Options menu to On, any subdirectories of     this path will be scanned as well.                                Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ tÆ
                        Drives to scan                        ══════════════     This option lets you select what drives to scan from    a list of accessible drives.     If you have set the Scan subdirectories option in    the Set Options menu to On, any subdirectories on    these paths will be scanned as well.                               Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ fÇ                     Enter path to scan                      ══════════════════     Enter the path that SCAN will scan when run.     You can use the normal cursor keys to move the cursor    while editing the path string.     Press Enter to accept the entered string, or press Esc    to abandon.                              Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀Φ                   Select drives to scan                    ═════════════════════     This option lets you select what drives to scan from    a list of accessible drives.     Move the highlight with the cursor keys, and toggle    drives on and off with the space key. Active drives    are denoted by the '√' character. Press Enter to    accept the selections, or press Esc to abandon the    changes.                             Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ l     ÷p                    Clean one path only                     ═══════════════════      This option lets you select if you want to clean only     one specific path or clean one or more disks in full.      By setting this option to On, you will be able to     enter a path in the Path to scan option in this     menu, and by setting it to Off, you will be able to     select the drives to scan from a list of drives.                              Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀  tQ	
                        Path To Clean                        ═════════════      This option lets you enter a specific path to clean.      If you have set the Clean subdirectories option in     the Set Options menu to On, any subdirectories of     this path will be cleaned as well.                                Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ töQ
                       Drives to Clean                       ═══════════════     This option lets you select what drives to clean from    a list of accessible drives.     If you have set the Clean subdirectories option in    the Set Options menu to On, any subdirectories on    these paths will be scanned as well.                               Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ fé                    Enter path to clean                     ═══════════════════     Enter the path that CLEAN will clean when run.     You can use the normal cursor keys to move the cursor    while editing the path string.     Press Enter to accept the entered string, or press Esc    to abandon.                              Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀δ                   Select drives to Clean                    ══════════════════════     This option lets you select what drives to clean from    a list of accessible drives.     Move the highlight with the cursor keys, and toggle    drives on and off with the space key. Active drives    are denoted by the '√' character. Press Enter to    accept the selections, or press Esc to abandon the    changes.                             Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀    ∞2E' (                     A virus was found!                      ══════════════════   On or more virusinfected files was found by SCAN while  scanning your disks. Since you have not set the AutoClean  option to ON, you will have to remove the virus manually  by selecting the Clean option of the Clean menu.   To setup CLEAN before execution, you will have to enter  the virus tag name in the Clean set options menu. Check the  View last Scan results in the Misc menu to find out  what tag name(s) to use. Also make sure you have the same  path and drives selected as in the Scan setup.   You could also set 'AutoClean' to On and rerun Scan for  an automatic cleaning.                        Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀  ^.E                     A virus was found!                      ══════════════════   On or more virusinfected files was found by SCAN while  scanning your disks. Since you have set the AutoClean  option to ON, ViruShell will try to disinfect all infected  files.   Note that CLEAN is unable to clean files from certain  viruses, you are then asked if you want to overwrite and  delete the infected file. If you answer 'Y' on this query,  the file will be totally unsavable so MAKE SURE that you  have a backup of the file!                           Go to Help index ▄                      ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ A